Stable for 20 horses, stables measuring 3x3m, 3.5×3.5m, 4x4m. Total size of the stables is 30×24 metres. The stables are spread rather chaotically. The width of the aisle is 3.5 metres.
Sliding stall front
Description
Sliding stall front is very convenient because it does not require much space in the aisle to open. Stationary stabling for stable equipment.
The height of the structures is 2.30 meters.
The design of the front of the frame. Direct sliding doors. Opening of the doors is parallel to the plane of the facade. Doors are moved along an upper guide rail on special carts. Two bearing anchors are installed at the bottom and the bottom part of the door leans on them during the motion. The lock is vertical with a spring. The wickets are offset to one side of the facade. The door opening is 1,2 meters. The width of the facades of 3 to 4 meters. Also the fronts have a rotary feeder, which opens 360 degrees. This makes it easier to feed the horse. A man does not have to open the door and go inside the stable. This saves a lot of time for service.
The side dividers are fully tubular or combined in lengths of 3 to 4 meters. Rear partitions are solid, 1.5 m high. Filling the lower part of the facade with 40mm thick board to a height of 1.4 meters. Grid height 0.95 meters. Corrosion protection – powder hot dip galvanization. Impregnation of the board – a special antiseptic. Mounting is carried out with anchors into the floor, walls and between themselves.
You can buy and order a Sliding stall front in Estonia from us.
Look also at our similar stall stalls https://fech.tech/product/compartment-door-horse-stall/
All our stables are made of high quality materials. Profiles and their thicknesses: 50x50x2 square pipe, 40x40x2 square pipe, 50x40x3 channel pipe, 21,3×2,8 round pipe, 48×3 round pipe. Boards of softwood (pine and spruce).
We can make you stables according to your designs or drawings. We produce stables of different models and modifications, fitting into the available space of the stables.
Our constructions are easy to assemble and difficult to break even for a powerful stallion. They are reliable and durable in operation. Every product includes a provision for replacing a board in case it breaks when hoof hit it, which is usually prevented by using 40mm thick tongue and groove wall timber. The wooden part of the stall becomes a monolithic wooden board.
