Stall for a horse with twin gates

Stall for a horse with twin gates

Our organisation has manufactured and installed 20 stalls for the stabling of horses on behalf of a horse club. Stabling for 20 horses, stables 3×3 in size. Total size of the stable is 30×10 meters. The width of the aisle between the rows of stalls is 3 meters.


A Stall for a horse with twin gates is very convenient as they can be opened individually.

Stable stabling for stable equipment.Structures are 2.4 metres high.Frame welded construction Swinging wicket door. Door on adjustable hinges. Spring lock. The front of the stable is symmetric. The wicket door is made in the centre of the facade. Facade width 4 meters.

The side partition is combined with a length of 3 metres. Filling with 40mm thick board to a height of 1,5 metres. Grate height 0.9m.

Boards are impregnated with a special antiseptic. Mounted with anchors into the floor, walls and supporting pillars of the building.

You can buy and order a stall for a horse with twin gates in Estonia.

The project consists of 10 stall areas on each side with 3×3 m stalls and 4 outbuildings at the ends of the stables. Plus an aisle between stalls of at least 3 meters. Given the thickness of the walls, an extra 1 meter was added, which resulted in a stable width of 10 meters. The length of the stabling, taking into account the thickness of the walls, was 30 metres. Together with the outbuildings the length of the stable was 36 metres. Walls of the stables are made of cellular concrete and additionally covered with 15 mm thick Finnish laminated plywood.

All of our stables are made of top-quality materials. Profiles and their thicknesses: 50x50x2 square steel pipe, 40x40x2 square steel pipe, 50x40x3 channel pipe, 21,3×2,8 round steel pipe, 48×3 round steel pipe. Softwood boards (pine and spruce).

We can make you stables according to your designs or drawings. We produce stabling of different models and modifications, fitting into the available space in the stables.

Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break during hoofing, it can usually be replaced without any damage thanks to the use of 40 mm tongue and groove board. The wooden part of the stall becomes a monolithic wooden board. See also our similar horse stalls


Go to Top