Stable for 20 horses. Stables for horses measuring 3.5×4 metres. The total size of the stable is 40×12 metres. The stables are lined up in two rows. The width of the aisle is 3,5 meters.
Compartment door horse stall
Description
The Compartment door horse stall is very convenient because it does not require much space in the aisle to open. Galvanized Horse Stalls.
Structures with a height of 2.30 metres.
The design of the front is framed.
Sliding doors straight. Opening of the doors is parallel to the facade. Doors are moved along an upper guide rail on special trolleys. Two bearing anchors are fitted at the bottom and the lower part of the door rests on these. The lock is vertical with a spring. The door is equipped with a window for communicating with the horse. It has its own lock and opens 180 degrees.
The wicket door is offset to one side of the facade. The door opening is 1,2 metres. The width of the facade is 3.5 metres. The board has decorative and ventilation slots for improved air circulation in the stables. The fasade also features a swivelable bunk that can be opened up to 360 degrees, making it easier for horses to feed themselves. This makes it easy to feed a horse. A person does not have to open the door and go into the barn. This saves a lot of time for handling.
The side partition is a combined 4 m long. Filling the lower part of the front with 40mm thick board to a height of 1,4 metres. Pipe grate height 0.95m. Corrosion protection – hot-dip galvanized. The impregnation of the board is a special antiseptic. Mounted with anchors into the floor, walls and between each other.
You can buy and order a Compartment door horse stall in Estonia from us.
See also our similar horse stalls https://fech.tech/product/stalls-for-horses-sliding-gate/
We can make you stall according to your sketches or drawings. We make stables in different models and modifications to fit in the available stabling space.
Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break during hoofing, it can usually be replaced without any damage thanks to the use of 40 mm tongue and groove board. The wooden part of the stall becomes a monolithic wooden board.
