Stalls for horses sliding gate

Stalls for horses sliding gate

Stalls for horses sliding gate. Stable for 18 horses. stables measuring 3.5×3.5 metres. The total size of the stables is 32×12 metres. The stables are located in one row. The width of the aisle is 4 meters.


The Stalls for horses sliding gate is very convenient as it does not require much space in the aisle to open.   Stable stabling for stable equipment.

Structures with a height of 2.35 metres.

A frame front construction. Sliding doors straight. Opening of the doors is parallel to the facade. The doors are moved along an upper guide rail on special trolleys. Two bearing anchors are fitted at the bottom and the lower part of the door rests on these. The lock is vertical with a spring. The door is equipped with a window for communicating with the horse. It has its own lock and opens 180 degrees.  The wicket door is offset to one side of the facade. The door opening is 1,2 metres. The width of the facade is 3.5 metres. There is also a feeding window in the façade, which facilitates feeding the horse.

The side partition is combined 3.5 metres long. Filling the lower part of the façade with 40mm thick board to a height of 1.4 metres. Pipe grate height 0.95m. Corrosion protection – powder coating in green colour. The impregnation of the board is a special antiseptic. Installation is carried out using anchors in the floor, walls and between each other.

You can buy and order a Stalls for horses sliding gate in Estonia from us.

See also our similar horse stalls

All our stables are made of high quality materials. Profiles and their thicknesses: 50x50x2 square steel pipe, 40x40x2 square steel pipe, 50x40x3 channel pipe, 21,3×2,8 round steel pipe, 48×3 round steel pipe. Softwood boards (pine and spruce).

We can make you stables according to your designs or drawings. We produce stabling of different models and modifications, fitting into the available space in the stables.

Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break during hoofing, it can usually be replaced without any damage thanks to the use of 40 mm tongue and groove board. The wooden part of the stall becomes a monolithic wooden board.


Go to Top