horse stall sliding door. Stable for 12 horses, stables measuring 3×3. Total size of the stable is 36×6 metres. Stables are in one row. The width of the aisle is 3 meters. Stables for ponies and adult horses. Height 2,2m, width 3m, depth 3,0m. Sliding door.
horse stall sliding door
Description
A horse stall with a sliding door is very convenient as it does not require much space in the aisle to open. Stable stabling for stable equipment.
Structures with a height of 2.2 metres.
The design of the front is framed. Sliding doors straight. Opening of the doors is parallel to the facade. Doors are moved along an upper guide rail on special trolleys. Two bearing anchors are fitted at the bottom and the lower part of the door rests on these. The lock is vertical with a spring. Wicket doors are offset to one side of the facade. Door opening of 1.2 meters. Facade width 3.0 metres.
Side partition combined 3 metres in length. Filling the lower part of the façade with 40mm thick board to a height of 1.5 metres. Pipe grate height 0.7 m. Corrosion protection – red powder coating. Impregnation of the boards is a special antiseptic. The boards were mounted with a gap of 40mm between them, in order to improve air circulation in the stalls.
They are mounted with anchors in the floor, walls and between each other
You can buy and order a horse stall sliding door in Estonia.
The stable stall for ponies has slightly different characteristics than the stall for ordinary horses.
Also have a look at our similar horse stables https://fech.tech/product/stall-for-horse-sliding-gate/
All our stables are made from high quality materials. Profiles and thicknesses used: 50x50x2 square tubing, 40x40x2 square tubing, 50x40x3 channel, 21.3×2.8 round tubing, 48×3 round tubing. Softwood boards (pine and spruce).
We can make you stables according to your designs or drawings. We produce stabling of different models and modifications, fitting into the available space in the stables.
Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break during hoofing, it can usually be replaced without any damage thanks to the use of 40 mm tongue and groove board. The wooden part of the stall becomes a monolithic wooden board.