Stall for horse sliding gate

Stall for horse sliding gate

Stall for horse sliding gate

Stables for 36 heads, stables size 3×3. The total size of the stable is 60×10 meters. Stables are located in two rows. The width of the aisle is 4 meters.


A Stall for a horse sliding gate is very convenient because it does not require a lot of space in the aisle to open.   Stable stabling for stable equipment.

Structures with a height of 2.3 metres.

The design of the front is framed. Sliding doors straight. Opening of the doors is parallel to the facade. Doors are moved along an upper guide rail on special trolleys. Two bearing anchors are fitted at the bottom and the lower part of the door rests on these. The lock is vertical with a spring. Wicket doors are offset to one side of the facade. Door opening of 1.2 meters. Facade width 3.0 metres.

Side partition combined 3 metres in length. Filling the lower part of the façade with 40mm thick board at a height of 1.4 metres. There is also a feeding trough in the façade, which makes it easier to feed the horse. A person does not have to open the door and go inside the stable. This saves a lot of time for maintenance.

Piping height 0.9 m. Corrosion protection – powder coating. Boards impregnated with a special antiseptic

Mounted with anchors into the floor, walls and between each other

You can buy and order a Stall for a horse sliding gate in Estonia from us.

Also have a look at our similar horse stalls

All our stalls are made of high quality materials. Profiles and thicknesses used: 50x50x2 square pipe, 40x40x2 square pipe, 50x40x3 channel pipe, 21.3×2.8 round pipe, 48×3 round pipe. Softwood boards (pine and spruce).

We can make you stables according to your designs or drawings. We produce stabling of different models and modifications, fitting into the available space in the stables.

Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break when hit by a hoof, it can usually be replaced without the use of 40 mm tongue and groove board. The wooden part of the stall becomes a monolithic wooden board.


Go to Top