Facades of the horsestall are sliding

Facades of the horsestall are sliding

Stables for 10 heads, stables of 3×4 meters. The total size of the stable is 30×12 meters. Stables are placed in one row. The width of the aisle is 3,5 meters.

Description

Facades of the horsestall are sliding are very convenient as they do not require much space in the aisle to open.   Stationary stall stables for stable equipment.

The height of the structure is 2.30 metres.

The structure of the front is framed. Sliding doors straight. Opening of the doors is parallel to the facade. Doors are moved along an upper guide rail on special trolleys. Two bearing anchors are fitted at the bottom and the lower part of the door rests on these. The lock is vertical with a spring. Wicket doors are offset to one side of the facade. Door opening of 1.2 meters. Facade width 3 meters. The façade also has a swivelling feeder that opens 360 degrees. This makes it easier to feed the horse. A person does not have to open the door and go into the barn. This saves a lot of time for handling.

The side bulkhead is a combined 4 metres long. The rear bulkhead is solid, 1.5 m high. Filling the lower part of the façade with 40mm thick board to a height of 1.4 metres. Pipe grate height 0.95m. Corrosion protection – powder coating in grey colour. The impregnation of the boards is a special antiseptic. Mounted with anchors into the floor, walls and between each other.

You can buy and order Facades of the horsestall are sliding in Estonia from us.

Also have a look at our similar horse stalls https://fech.tech/product/stall-facades-sliding-doors/ or https://fech.tech/product/sliding-stall-front/

All our stables are made of high quality materials. Profiles and thicknesses used: square tube 50x50x2, square tube 40x40x2, channel channel 50x40x3, round tube 21,3×2,8, round tube 48×3. Softwood boards (pine and spruce).

We can make you stables according to your designs or drawings. We produce stabling of different models and modifications, fitting into the available space in the stables.

Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break when hit by a hoof, it can usually be replaced without the use of 40 mm tongue and groove board. The wooden part of the stall becomes a monolithic wooden board.

Title

Go to Top