Stall facades sliding doors

Stall facades sliding doors

Stable for 10 horses. Stables for horses measuring 3×4 metres. Total size of the stable is 30×12 meters. The stables are mounted in one row. Aisle width 3,5 meters.


The Stall facades sliding doors is very convenient because it does not require a lot of space in the aisle to open.   Stationary stabling for stable equipment.

The height of the structures is 2.30 meters.

The design of the front of the frame. Doors sliding straight. Additionally in the gate made a V-shaped opening for the head of the horse. Doors opening is parallel to the facade plane. The doors are moved along an upper rail on special carts. Two bearing anchors are fitted at the bottom and the lower part of the door rests on them during the movement. The lock is vertical with a spring. The wickets are offset to one side of the facade. The door opening of 1,2 meters. The width of the facade of 3 meters. Also on the front there is a rotary feeder, which opens 360 degrees. This makes it easier to feed the horse. A man does not have to open the door and go inside the stall. This saves a lot of time during service.

There is a bracket for the blanket on the rolling gate of the stall. It can also be used as a handle.

Side partition is combined length of 4 meters. Rear partition is solid, 1.5 meters high. Filling the lower part of the facade with 40mm thick board to a height of 1,4 meters. Grid height 0.95 meters. Corrosion protection – powder coating in gray color. Impregnation of the board – a special antiseptic. Mounting is carried out with anchors into the floor, walls and between themselves.

You can buy and order Stall facades sliding doors in Estonia from us.

Also look at our similar stables for horses

We can make you stabling according to your sketches or drawings. We produce stables of different models and modifications, fitting into the available space of the stables.

Our constructions are easy to assemble and difficult to break even for a powerful stallion. They are reliable and durable in operation. Every product includes a provision for replacing a board in case it breaks when hoof hit it, which is usually prevented by using 40mm thick tongue and groove wall timber. The wooden part of the stall becomes a monolithic wooden board.



Go to Top