Facades for a pony club

Facades for a pony club

Stable for 20 horses, stables measuring 3×3. Total size of the stable is 30×12 metres. The width of the aisle between the stall rows is 3 metres.


Facades for a pony club differ from large horse fronts in their size

Stationary stabling for stable equipment.

The height of the structure is 2.2 metres.

The structure is a welded frame gate with a single swing opening. Door on welded hinges. The lock with a spring. The front of the stable is not symmetric. The gate is made on the side. Width of the facade is 3 metres.

The side partition is combined length of 3 metres.

Filling with 40mm thick board to a height of 1 metre.

Pipe grate height 1.2 metres.

Two feeding windows are made in the façade and wicket door.

Corrosion protection is powder coated in green.

Boards are impregnated with a special antiseptic

We anchor the entire stable to the floor, walls and uprights.

All our stables are made from high quality materials. Profiles and their thicknesses: 50x50x2 square steel pipe, 40x40x2 square steel pipe, 50x40x3 channel pipe, 21.3×2.8 round steel pipe, 48×3 round steel pipe. Softwood boards (pine and spruce).

We can make you stables according to your designs or drawings. We produce stabling of different models and modifications, fitting into the available space in the stables.

Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break during hoofing, it can usually be replaced without any damage thanks to the use of 40 mm tongue and groove board. The wooden part of the stall becomes a monolithic board.

You can buy and order Facades for a pony club in Estonia from us.

Check out our similar products https://fech.tech/product/sliding-stall-doors/


Go to Top