Goat farm equipment

Description

Goat farm equipment is quite simple. It consists of paddocks and a feed table. In turn, the corrals consist of gates and fences.

The feed table consists of racks and longitudinal pipes with a diameter of 48 mm, which are adjustable in height. The main task of such a feed table is to give goats access to feed and at the same time prevent it from reaching the feed table. The goat farm in this case is divided into 4 parts: two stall zones with bedding, in the middle there is a wide fodder table, on which the feeder drives and distributes feed and a milking and milking unit.

Equipment for a goat farm is mounted on concrete racks, and gates or fences are hung on them without the use of welding. Only bolt assembly is used, thereby the integrity of the anti-corrosion coating is not violated. Protection of stall equipment against corrosion is carried out by hot-dip galvanizing.

Animal keeping

Type of keeping goats – year-round stall. Animals are fed according to the principle of a feed table, and not from feeders. They drink from special automatic drinkers, which are attached to the wall at a certain height.

The room should be equipped with forced ventilation and good lighting. Subject to all these conditions, the cost of human labor will be minimized. Thus, even one person can take care of the animals.

Stall type of keeping animals

As needed, the bedding for the animals is filled with new straw. Thanks to biothermal processes, heat is released. Thus, there is a reduction in the cost of heating the room in cold weather. Such premises are cleaned at least twice a year.

You can buy and order Goat farm equipment in Estonia from us.

Our similar project https://fech.tech/product/goat-farm-pens/