Stable for 20 horses, stables measuring 3.5×4. The total size of the stables is 40×12 metres. Stables are located in two rows. The width of the aisle is 3,5 meters.
Best Quality Horse Stalls
Sliding stalls for horses
Description
Sliding stalls for horses are very convenient because they do not require much space in the aisle to open. Stationary stabling for stable equipment.
The height of the structures is 2.3 meters.
The design of the front of the frame. Doors in the form of an arch. Opening of the doors is parallel to the plane of the facade. Doors move along upper guide rail on special carts. Two bearing anchors are fitted at the bottom and the door is supported by its lower part while moving on them. The lock is vertical with a spring. The wickets are offset to one side of the facade. The door opening is 1,2 meters. The width of the front of 3.5 meters.
Side partition combined length of 4 meters. Filling the lower part of the facade with 40mm thick boards to a height of 1.5 meters. Boards in the aisle were additionally covered with laminate for beauty. There is also a feeding window in the façade, which facilitates feeding the horse. A person does not have to open the door and go inside the stall. This saves a lot of time during service.
Height of pipe grating 0,95 m. Corrosion protection – hot-dip galvanizing with subsequent additional coating with allumol. Impregnation of the board – a special antiseptic
Installation is carried out with anchors in the floor, walls and between themselves.
Sliding stalls for horses in Estonia you can buy and order from us.
Look also at our similar horse stalls https://fech.tech/product/internal-stable-frontage-with-v-sliding-door/
All our stables are made of high quality materials. Profiles and thicknesses used: square tube 50x50x2, square tube 40x40x2, channel channel 50x40x3, round tube 21,3×2,8, round tube 48×3. Boards of softwood (pine and spruce).
We can make you stables according to your designs or drawings. We produce stables of different models and modifications, fitting into the available space of the stables.
Our constructions are easy to assemble and difficult to break even for a powerful stallion. They are reliable and durable in operation. Every product includes a provision for replacing a board in case it is broken by hoof impact, which is generally avoided by using 40mm thick tongue and groove wall timber. The wooden part of the stall becomes a monolithic wooden board.
