Description

The V-Front Stall Wave is used in stables with friendly horses that will not bite their neighbours. Stationary stall stables for stable equipment. Construction height 2.3 meters. The front of the stable is symmetrical. The structure of the front consists of left and right posts and a swinging door. The posts are topped by ornamental balls with gilding. The wicket door is centrally located. The door is hinged on adjustable hinges. Spring-loaded lock. Facade width 3 metres.

Combi side bulkhead 3 metres long.

Rear partition 1.5 metres in height.

Filling with 40mm thick board to a height of 1.4 metres.

Pipe grate height 0.9m.

Corrosion protection – hot-dip galvanised and then powder coated black.

Boards are impregnated with a special antiseptic.

The partitions are mounted with anchors in the floor, walls and between each other. You can buy and order a V-Front Stall Wave in Estonia from us.

All our stalls are made of top-quality materials. Profiles and their thicknesses: 50x50x2 square pipe, 40x40x2 square pipe, 50x40x3 channel pipe, 21,3×2,8 round pipe, 48×3 round pipe. Softwood boards (pine and spruce).

We can make you stables according to your designs or drawings. We produce stabling of different models and modifications, fitting into the available space in the stables.

Our constructions are easy to assemble and hard to break, even for stallions. They are reliable and robust in use. Every product has been designed so that, should a board break during hoofing, it can usually be replaced without any damage thanks to the use of 40 mm tongue and groove board. The wooden part of the stall becomes a solid board.

Also have a look at our similar horse stalls https://fech.tech/product/internal-stable-frontage-with-v-hinged-door/